拉威尔（北京）科技有限公司

台式万能刀具刃磨床LW-2台式万能刀具刃磨床LW-2台式万能刀具刃磨床主要用于刃磨普通刀具，如各类型铣刀、铰刀、车刀、刨刀、丝攻、锪钻等。适用于工具车间，中小型机械厂，教学实习工厂等。该机床磨头可以又轴定位，任何螺旋角和后角均可快速调整。砂轮主轴与电机一体，采用预加载荷的高精度滚动轴承。工作台采用预加载荷的闭式精密滚动导轨，操作灵活。轻巧。LW—2 bench style universal cutter grinder is used for grinding normal cutter such as various kingds of milling cutters,reamers,lathe tools,planning tools,screw tap and shaving drill ect.The machine works well in cutter shop,middle＆small scale machine corporation and school factory ect.The wheel head can be orientated in double axes so that any spiral angle and back angle may be adjusted rapidly.Wheel spindle and motor is either designed to use preload super precision ball bearing in a case.Work table adopts pre-load close precision ball guide and it makes operating be flexible and light.LW-2台式万能刀具刃磨床技术参数 SPECIFICATIONS可磨最大工件直径 Max.workpiece diameter 270mm两顶尖间最大工件长度 Max.workpiece Length(between centres) 270mm顶尖中心高 Center height over the table 137mm工作台移动行程 纵向 Longitudinal displacement of the table 200mm 横向 Transverse displacemtnt of the table 140mm砂轮架垂直移动行程 Vertical tracel of the wheeihead 290mm砂轮架水平回转角度 Swivel of the wheeihead in the horizontal plane ±45°砂轮轴倾斜角度 Tilting of the wheel spindle ±45°砂轮主轴转速 Wheel spindle speeds 2880rpm电压 Voltage 110v/200v机床总功率 Total power 375w机床外形尺寸 Overall dimcnsion 680×560×790mm包装箱尺寸 Size of case 720×620×870mm毛重/净重 Gross Weight/Nte Weight 200/200kg随机附件 STANDARD ACCESSORIES刀具磨架 1套 1set-Workhead左尾架 1套 1set-Left tailstodk碗型砂轮 1件 1piece-Bowl type Wheel顶尖 1件 1piece-Center延伸刀具磨架 1套 1ser-Extension Workhead刀齿撑具 1套 1set-Tooth rest蝶形砂轮 1件 1piece-Dish type Wheel杯型砂轮 1件 1piece-Cup type whell内六角扳手 5件 5piece-Wrench for hexagon socker车刀磨架 1套 1set-Lathe vutting tool clamper特殊附件（另行计价）EXTRA EQUIPMENT（at extra cost）芯轴14 ，22，27，32，40，1 各一套 Cutter arbor 1set each锥柄心轴承6，22，27，32，40 各一套 Face-mill holder 1set each弹簧夹头3~25 1/16 ~1 1/8 各一套 Spring collet 1set each工作精度 Work Accuracy直线度 Linearity 0.01mm刃磨刀具表面粗糙度 Poughness of the ground cutter surface Ra0.4